Panel setup menu VJ-1628X OPERATION MANUAL
204 5.1 Setup menu
Setup item Setting Description
Type 1 to 30 Print Mode Sets up the print mode according to the usage of print data or print speed.
• [Enter] key: shifts to the sub menu.
5.1.1.1.1 Print Mode menu
Adjust Print Sets up when adjusting the printer for the optimum quality of image print.
• [Enter] key: shifts to the sub menu.
5.1.1.1.2 Adjust Print menu
PF Adjust Sets up various settings on the media feed compensation.
• [>] key: shifts to the sub menu.
5.1.1.1.3 Media feed compensation
Pre-heater Sets the temperature of Pre-heater.
• [Enter] key: shifts to the sub menu.
5.1.1.1.4 Pre-heater menu
Platen heater Sets the temperature of Platen heater.
• [Enter] key: shifts to the sub menu.
5.1.1.1.5 Platen Heater menu
Dryer Sets the temperature of Dryer.
• [Enter] key: shifts to the sub menu.
5.1.1.1.6 Dryer menu
Vacuum Fan Sets up vacuum fan operation.
• [Enter] key: shifts to the sub menu.
5.1.1.1.7 Vacuum Fan menu
Media Thickness Set the thickness of the media you are using.
• [Enter] key: shifts to the sub menu.
5.1.1.1.7 Vacuum Fan menu
User Copy Collectively copies the setting values of the user type currently selected to
a different user type.
• [Enter] key: shifts to the sub menu.
5.1.1.1.9 User Copy menu
— • [Cancel] key: shifts to the previous menu.
5.1.1 User Type menu
To Next Page
Loading...
Need help?
General