VJ-1628X OPERATION MANUAL Maintenance
6.3 Replacing consumable components 271
• Do not use the Ink cartridge(s) you have inserted into Ink cartridge slot(s) for other printers. The
Ink cartridge(s) will not be used again.
• Do not shake Ink cartridges or Ink packs strongly.
Doing so may cause ink leakage.
• Do not disassemble Ink cartridges.
A disassembled Ink cartridge or Ink packs cannot be used.
• When the Ink cartridge or Ink pack is moved from a cold place to a warm place, leave it for 3 hours
or more in the new printing environment before printing.
• Do not refill an ink cartridge or ink pack with ink.
It may result in abnormal printing.
• Insert or remove Ink cartridge and High-capacity ink pack adapter at the time of replacement only.
Otherwise, it may result in incorrect printing.
(1) Replacing 220ml and 440ml Ink cartridges
1. Confirm that the printer is turned ON.
• Do not replace Ink cartridges when the printer is turned OFF.
The remaining ink may not be detected correctly, causing abnormal printing.
2. Remove Ink cartridge that you want to replace from Slot.
a. For 220ml Ink cartridges
No. Name
1 Ink cartridge
2 Ink cartridge slots
To Next Page
Loading...
Need help?
General