VJ-1628X OPERATION MANUAL Maintenance
6.3 Replacing consumable components 281
c. Press the [+] key or [-] key on Operation panel to select “Set 20: CR Maintenance”.
d. Press the [Enter] key on Operation panel.
• “CR Mainte.: Start” is displayed on Operation panel.
• The display enters the CR Maintenance menu.
5.1.20 CR Maintenance menu
3. Press the [Enter] key on Operation panel.
• Maintenance starts.
• Print head moves to the left.
• “CR Mainte.: End” is displayed on Operation panel.
To Next Page
Loading...
Need help?
General