Program
Number
Program Name Default Note
11-10-27 Service Code Setup (for System Administrator) -
Trunk Port Disable for Outgoing Calls
645
11-11-13 Service Code Setup (for Setup/Entry Operation) -
Display Language Selection for Multiline Termi-
nal
678
11-12-01 Service Code Setup (for Service Access) - By-
pass Call
707
11-12-14 Service Code Setup (for Service Access) - Trunk
Group Access
704
14-01-01 Basic Trunk Data Setup - Trunk Name Trunk port Number: 001 ~ 084
Trunk Name: 001 ~ 084
14-01-02 Basic Trunk Data Setup - Transmit Level 32 (0dB)
14-01-03 Basic Trunk Data Setup - Receive Level 32 (0dB)
14-01-07 Basic Trunk Data Setup - Outgoing Calls 1
14-01-10 Basic Trunk Data Setup - DTMF Tones for Outgo-
ing Calls
0
14-02-05 Analog Trunk Data Setup - Dial Tone Detection
for Manually Accessed Trunks
0
14-02-11 Analog Trunk Data Setup - Next Trunk in Rotary
if No Dial Tone
0
14-05-01 Trunk Group - Trunk Group Number Trunk Port 1~84 = Priority 1~84
14-06-01 Trunk Group Routing - Priority Order Number Route 1, Order Number 1 = 1
(Trunk Group 1), Order Numbers
2, 3, 4 = 0 (Not Specified)
All Other Routes (2~100) and Or-
der Numbers (1~4) = 0 (Not Speci-
fied)
14-07-01 Trunk Access Map Setup Access Map 1~84 = Trunk Ports
1~84 assigned with option 7 ac-
cess (incoming and outgoing ac-
cess and access when trunk is on
Hold).
15-02-01 Multiline Telephone Basic Data Setup - Display
Language Selection
(To select options 8~10, press either 8 or Flash, then
press line keys 1~3. Key 1 is option 8, Key 2 is op-
tion 9, and Key 3 is option 10.)
1
15-02-08 Multiline Telephone Basic Data Setup - Automat-
ic Handsfree
1
15-03-03 Single Line Telephone Basic Data Setup - Termi-
nal Type
0
15-06-01 Trunk Access Map for Extensions 1
15-07-01 Programmable Function Keys Refer to Programming Manual.
20-02-06 System Options for Multiline Telephones - Prese-
lection Time
5 (seconds)
20-02-09 System Options for Multiline Telephones - Dis-
connect Supervision
1
20-06-01 Class of Service for Extensions Extension 101 is Class 15 and oth-
er Extension are Class 1
20-07-12 Class of Service Options (Administrator Level) -
Trunk Port Disable
COS 01~15 = 1
20-08-02 Class of Service Options (Outgoing Call Service)
- Trunk Outgoing Calls
COS 01~15 = 1
ISSUE 2.0 SL1100
Features and Specifications Manual 1-145
C
To Next Page
Loading...
