To program a key, press Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you ... Key Lamp Status Also see Srvc
Code
Note
Code: 83 + Fuc-
tion code
Operation: Press
key
Voice Mail Select Conversation
Recording Function.
On when set. -
Code: 84 + Line
Drop key
Operation: Press
key
Line Drop Use Line Drop None -
Code: 86 + Pri-
vate Call Refuse
key
Operation: Press
key
Private Call Refuse Use Private Call
Refuse
Slow Flash when set. 646
Code: 87 + Caller
ID Refuse key
Operation: Press
key
Caller ID Refuse Use Caller ID Re-
fuse
Slow Flash when set. 748
Code: 88 + table
No. 1 ~ 500 at
PRG 22-17
Operation: Press
key
Dial-In Change Dial-In
Mode
Off: pattern1, pat-
tern5~8
On: pattern2
Slow flash: pattern3
Fast flash: pattern4
609
Code: 91 + Live
Monitoring key
Operation: Press
key
Voice Mail Use Live Monitoring On when set. not assigned
Code: 94 + Call
Attendant key
Operation: Press
key
Call Attendant Use Call Attendant Fast flash when setup
for No answer calls.
Twice blink when set-
up for Busy calls.
On when setup for
Busy/No answer calls.
Busy:696
No Answer:697
Code: 97 + Door-
phone 1 ~ 6
Operation: Press
key
Doorphone Use Doorphone ac-
cess
On when Doorphone
Busy.
Fast flash when Door-
phone Incoming.
702
Code: #02 + pack-
age 1 ~ 9 to cut
the telephone
power.
Operation: Press
key
Ecology Set telephone pow-
er cut.
On when set. 731
Code: #03 + Re-
mote Monitor Per-
mit key
Operation: Press
key
Security Set Remote Moni-
tor.
Slow flash when set
Remote Monitor
610
Code:
To Next Page
Loading...
