Troubleshooting
75
7 (If the card is in other than the reverse
section)
Rotate the feeding knob.
• Jammed cards are ejected from Card Ejection Slot
(left).
• If the jam is cleared, then go to Step 8.
8 Close the Top Cover and Front Cover.
• Before closing the cover, return the Card Case, decurl
section, Cleaning Roller, and Cleaning Tape Cassette
to their original positions.
9 Press the SET Key.
• The error message on the LCD Panel disappears, and
the printer returns to Normal Mode.
Secondary Transfer Section
Feeding
Knob
To Next Page
Loading...
