Optionen
10-1
P/N 7135268A
E 2007 Nordson Corporation
PURBlue EC
Section 10
Options
Casters
Installing Kit (Accessory)
The kit consists of a pair of casters with brakes and a pair without brakes.
NOTE: Attach the casters with brakes (Fig. 10-1, right) to the side of the
electrical cabinet.
1. Lift the melter with a suitable floor conveyor (lift truck or fork lift).
2. Detach machine feet.
NOTE: The back plug plate must be removed before the back left machine
foot can be detached.
Fig. 10-1
3. Attach casters. Use the fastening holes for the machine feet to attach
the casters.
To Next Page
Loading...
