Nordson PURBlue EC - Removing the Software from Your PC; Linking PC and Melter

11 22
00
44
55
33
66
99
Melter Communication
C-3
P/N 7135268B
E 2008 Nordson Corporation
PURBlue EC
Removing the Software from your PC
NOTE: Users of Windows XP, 2000 and NT must have administrator
privileges to remove the software from their PCs.
When the software is removed, the files containing melter settings, saved
with the NCM, are not deleted. Settings files (file extension .ncm) are stored
in your Windows folder My Documents (default).
With the NCM_Blue InstallShieldt Wizard
1. Double click on the file NCMBlue.exe.
2. Select Remove and follow the instructions on the screen.
With Windows (Example: Windows 2000)
1. Select Start > Preferences > Control Panel
2. Double click on Software.
3. Select NCM_Blue from the list, then click on Change/remove and
confirm.
Linking PC and Melter
Connect a serial cable between the COM port of the PC and the serial
interface (COM port) on the melter control panel.
Fig. C-1