Nordson PURBlue EC - Restoring Melter Settings

Melter Communication
C-5
P/N 7135268B
E 2008 Nordson Corporation
PURBlue EC
7. Enter a file name for the group of settings to be saved, then click on
Save.
The bar indicates the progress of the storage. When saving is
completed, the melter automatically reverts to normal mode (Auto-scan).
NOTE: If you intend to save several variations of melter settings with
the NCM, use a name system that clearly allocates each settings file (file
extension .ncm) to the respective process or final application.
8. Click on OK to close the NCM.
Restoring Melter Settings
1. Perform steps 1 to 5 under Saving Melter Settings
2. Click on Restore Settings.
The Open dialog box appears.
3. Select the settings file (file extension ncm) you wish to restore and then
click on Open.
The Restore Settings bar indicates the progress of restoring. When
restoring is completed, the melter automatically reverts to normal mode
(Auto-scan).