Nordson PURBlue EC - Connecting Inert Gas

1
3
2
Installation
3-14
P/N 7135268B
E 2008 Nordson Corporation
PURBlue EC
Connecting Inert Gas
WARNING: Observe safety instructions regarding handling technical gas in
cylinders. Use a pressure regulator to reduce air pressure. The inert gas
inlet pressure may not exceed 2 bar (200 kPa / 29 psi).
CAUTION: Use only suitable inert gas. Information can be obtained from
the Material Safety Data Sheet or the manufacturer of the material in the
tank.
The arrow points to the handwheel of the pressure controller.
Recommended setting: 0.3 bar / 30 kPa / 4.35 psi
1: Pressure display Inert gas
2: Pneumatic safety valve
3: Connection Inert gas
The pneumatic safety valve limits the inert gas inlet pressure to 2 bar
(200 kPa / 29 psi).
1
Fig. 3-14 Tower and inert gas labels