Nordson PURBlue EC - Installing the Software

Melter Communication
C-2
P/N 7135268B
E 2008 Nordson Corporation
PURBlue EC
Installing the Software
NOTE: When the system prompts you to select an installation location,
Nordson recommends accepting the suggested location.
Version Use
Single installation file
NCMBlue.exe
You download the software from www.enordson.com, and the PC used
for downloading is or can be linked to the melter.
OR
You download the software from www.enordson.com onto a PC that can
not be linked to the melter but has a CD-RW drive and the PC linked to
the melter has a CD drive.
OR
You have a CD with the software and a PC with a CD drive that can be
linked to the melter.
1. Save the file NCMBlue.exe on the PC or insert the CD.
2. Double click on NCMBlue.exe.
The installation assistant NCM_Blue InstallShieldt Wizard appears
3. Click on Next and follow the instructions on the screen.
4. When the message appears indicating that installation is completed,
click on Finish.