Nordson PURBlue EC - Structure of Change History Log; Example 1 − Parameter Changed; Example 2 − Setpoint Temperature Changed; Example 3 − Empty Log Entry

Operation
4-13
P/N 7135268B
E 2008 Nordson Corporation
PURBlue EC
Structure of Change History Log
First digit
Second
digit
Third and fourth digit
P
(Parameter)
Indicates the number of the parameter that was changed
Used in conjunction with the LEDs on the component keys to indicate the
location and method of a setpoint temperature change.
When this LED
is on..
And the fourth
digit indicates..
The change
was to..
And the
method of
change was..
−
Tank key 1 Tank Individual
S
(Setpoint)
−
Hose key 1– 6 Hose Individual
(Setpoint)
Gun key 1– 6 Gun Individual
All keys 0 All components Global
Hose key 0 All hoses
Global-by-
component
Gun key 0 All guns
Global-by-
component
Example 1 − Parameter Changed
Parameter 4 (ready delay) was changed.
Example 2 − Setpoint Temperature Changed
If the LED on the gun key is illuminated, it indicates that the
”Global-by-component” method was used to change the temperature of the
guns.
Example 3 − Empty Log Entry