Nordson PURBlue EC - Section 3 Installation

1
2
3
4
Installation
3-1
P/N 7135268B
E 2008 Nordson Corporation
PURBlue EC
Section 3
Installation
WARNING: Allow only qualified personnel to perform the following tasks.
Observe and follow the safety instructions in this document and all other
related documentation.
Transport
S Refer to section Technical Data for weight. Use only suitable transport
devices.
S If possible, use the pallet (3) that came with the melter and use angle
brackets (2) to fasten the melter.
S Use a sturdy box (1) or the folding box (4) to protect from damage.
S Protect from humidity and dust.
S Avoid jolts and vibrations.
Fig. 3-1 Principle drawing
Storage
CAUTION: Do not store melter outside! Protect from humidity, dust and
extreme temperature fluctuations (formation of condensation).
Unpacking
Unpack carefully and check for damage caused during transport. Save
pallet, angle brackets and box for later use, or dispose of it properly
according to local regulations.
Fig. 3-2