Recipes
RECIPE 1 05.09.05 TEXT 1
RECIPE 2 07.09.05 TEXT 2
File: Description:
RECIPE 3
Fig. 4‐55
Operation
4‐50
P/N 213828_11
2014 Nordson Corporation
VersaBlue_PPA
Melter (contd.)
Recipes
A recipe is a file in which the customer saves his production-specific
parameters.
Recipes are saved on the IPC memory board. They can also be saved on an
external PC and then transferred from there again. This allows:
Recipes to be exchanged between melters
Existing recipes to continue to be used, even after the memory board is
replaced.
Refer to Operation via the IPC Webserver for Upload and Download of
Customer Recipes.
Save recipe
The operator must enter a name (max. 8 characters) under File. To better
identify the individual recipes, information such as the name of the
application can be entered under Description. All current, adjustable
parameters are saved, except for the following.
Exceptions:
Brightness (and contrast)
Date / time
Local language
IPC IP address, subnet mask and gateway address
PROFIBUS address
Passwords
Selected line speed signal.
Load recipe
The current parameters are overwritten with the values from the selected
recipe.
NOTE: If during loading of the recipe (approx. 4 s) the melter is switched off
(e.g. power failure), the control unit will no longer function properly. The
desired recipe must then be loaded again.
Recipe is irrevocably deleted.
Sort recipes by name, description or date.
To Next Page
Loading...
