Nordson VersaBlue VA - Cleaning Filter Cartridge (Week 17;2012 and Later); Assembling Filter Cartridge

Maintenance
5‐15
P/N 213828_11
 2014 Nordson Corporation
VersaBlue_PPA
Cleaning Filter Cartridge (Week 17/2012 and Later)
1. Disassemble the filter cartridge.
2. Use a cleaning agent to remove any adhesive residue that can not be
removed mechanically.
3. Always follow the manufacturer's instructions when using cleaning
agents!
5
2
8
3
6
7
4
9
3
1
Size 24
Size 46
Si
ze
22
Fig. 5‐10
1 Filter screw
2 O‐ring, 48 x 2
3 O‐ring, 28 x 2
4 Filter shaft
5 Filter sheath
6 Filter screen
7 Filter nut
8 O‐ring, 44 x 3
9 Locknut (filter cartridge)
Assembling Filter Cartridge
1. Clamp the filter screw vertically in a vice.
2. Carefully inspect O‐rings; replace if necessary.
3. Assemble the individual parts (Refer to illustration above).
4. Screw the filter nut (7, Fig. 5‐10) onto the filter shaft thread (4) by hand.
Use caution to prevent the filter screen (6) from jamming.
5. Tighten with a torque wrench (size 46).
Torque 14 Nm / 124 lbin.
6. Screw on the locknut (9) and tighten with a torque wrench (size 22).
Torque 24 Nm / 212 lbin.
NOTE: Nordson recommends using a second wrench to brace the filter nut
and prevent it from turning.