Installation
3‐2
P/N 213828_11
2014 Nordson Corporation
VersaBlue_PPA
Lifting (Unpacked Melter)
Refer to the section Technical Data for weight. Lift melter only at the chassis
using suitable lifting equipment or a forklift.
Installation Requirements
Set up only in an environment that corresponds to the stated Degree of
Protection (Refer to section Technical Data). Do not set up in a potentially
explosive atmosphere! Protect from vibration.
Protect the control panel from direct sunlight. The UV rays reduce the
serviceable life of the liquid crystals and disrupt the function test when
booting.
Required Space
NOTE: *) For minimum bending radius refer to the hose manual
2701385
1445
855
245
400
210
1270
*)
Fig. 3‐3 V12 and V25
2701385
1760
1585
1055
245
600
210
1665
*)
Fig. 3‐4 V50
To Next Page
Loading...
