Nordson VersaBlue VA - Alarm Number, Alarm Text and Optional Light Tower

Status display
Troubleshooting
6‐2
P/N 213828_11
 2014 Nordson Corporation
VersaBlue_PPA
Alarm Number, Alarm Text and Optional Light Tower
The status line of the control panel indicates only Warning, Fault or
Shutdown.
The special alarm text can be found under
(V2, Alarm log) or is
shown directly when the line Status display is touched.
Light tower colors
Status Green Yellow Red
Status
display
Heatup phase 
(Motor) startup protection active  
System ready 
Standby active 
Heaters off
Motor running 
Pressure build‐up completed 
Alarm no. Status Green Yellow Red
Status
display
Warning
The operator must decide whether the situation is critical
for the application and action is required.
The system remains ready for operation.
 
6 Service interval is expired  
11 Tank level low  
12 Tank overfilled  
14 I/O board: incorrect software version
 The firmware version of the I/O board installed is not
compatible with the IPC program version

22 Channel: Overtemperature warning
 Refer to alarm no. 21 Channel: Overtemperature
fault
 
24 Channel: Undertemperature warning
 Refer to alarm no. 23 Channel: Undertemperature
fault
 
41 Overpressure warning: Motor #, Sensor #
 Refer to Troubleshooting Tables in this section
 
42 Underpressure: Motor #, Sensor #
 Refer to Troubleshooting Tables in this section
 