Operation
4‐21
P/N 213828_11
2014 Nordson Corporation
VersaBlue_PPA
Filling Tank
CAUTION: Cease operation before the tank is completely empty. If there is
too little material in the tank, the material can overheat. Overheated material
can char, collect on surfaces and cause malfunctioning.
For melters with inert gas equipment (option): Ensure that the inert gas inlet
hole is not blocked with material.
Manually
ATTENTION: Hot! Risk of burns. Wear appropriate protective
clothing/equipment. Tank and tank lid are hot. When filling, hot material may
splash out of the tank. Use caution when filling tank with material.
CAUTION: Before filling the tank, ensure that the tank and material are
clean and free of foreign material. Foreign substances can hinder functioning
or even cause damage to the melter or accessories.
Fig. 4‐12
To Next Page
Loading...
