Nordson VersaBlue VA - Cleaning Filter Cartridge (until Week 17;2012); Assembling Filter Cartridge

Maintenance
5‐14
P/N 213828_11
 2014 Nordson Corporation
VersaBlue_PPA
Cleaning Filter Cartridge (Until Week 17/2012)
1. Disassemble the filter cartridge.
2. Use a cleaning agent to remove any adhesive residue that can not be
removed mechanically.
3. Always follow the manufacturer's instructions when using cleaning
agents!
5
2
2
7
4
Size 16
6
1
3
2
Size 13
Size 24
Fig. 5‐9
1 Filter screw
2 O-ring
3 Thread
4 Filter sheath
5 Filter screen
6 Nut
7 Hexagon nut (locknut)
Assembling Filter Cartridge
1. Clamp the filter screw vertically in a vice.
2. Carefully inspect O‐rings; replace if necessary.
3. Assemble the individual parts (Refer to illustration above).
4. Screw the nut (6, Fig. 5‐9) onto the thread (3, Fig. 5‐9) by hand. Use
caution to prevent the filter screen from jamming.
5. Tighten with a torque wrench (size 16).
Torque 14 Nm / 124 lbin.
6. Secure with a locknut; use a torque wrench (size 13).
Torque 24 Nm / 212 lbin.
NOTE: Nordson recommends using a second wrench to brace the nut and
prevent it from turning.