Nordson VersaBlue VA - Example: Increase Setpoint Temperature

220
GRID
Temperature setpoints ° C ° C
ALL HOSES
ALL GUNS
ALL
RESERVOIR
Hose 1
Gun 1
50
230
51
22048
23047
Go to application group
Fig. 4‐24
220
Hose 1
Temperature setpoints ° C ° C
Min.:
230
789
456
123
.0
Max.:
Fig. 4‐25
Hose 1
Operation
4‐31
P/N 213828_11
 2014 Nordson Corporation
VersaBlue_PPA
Temperature Parameters (contd.)
Touch the Channel symbol / number key. A window opens. Touch the
group key to move to the first temperature channel of the selected application
group.
Example: Increase Setpoint Temperature
1. Touch to select Hose 1.
2. Press
10 times or hold it down to increase the temperature by
10°C.
OR
3. Touch the green field 220°C in the right temperature column (setpoints).
4. Enter 230 in the input window and confirm with
.
To set the parameters, select the temperature channel (in this case: Hose 1)
and touch the green field Hose 1. Then refer to Control Panel - Overview - /
T2.
For information on changing a name to your local language (e.g. Hose 1 to
XYZ 1), refer to Control Panel - Overview / T3.