Maintenance
5‐6
P/N 213828_11
2014 Nordson Corporation
VersaBlue_PPA
Important Regarding Hooks (Insulation Blanket Support)
If the tank lid was released: Use the shorter screws for the holes indicated by
the arrow. Do NOT fasten a hook here. Tighten the screws carefully to
prevent damage to the injection (PEM) nuts!
Fig. 5‐3 Top view
Fan and Air Filter
Depending on dust accumulation, the filters (1 and 3) for the air inlet and
outlet (4) must be cleaned (knocked out) or replaced.
1
2
3
4
Fig. 5‐4
1 Air filter, top air inlet
2 Fan
3 Air filter, bottom air inlet 4 Air filter, air outlet
To Next Page
Loading...
