Nordson VersaBlue VA - Motor; Switching On;Off Motor (Individual Enable); Selecting Key-To-Line or Manual Mode

1
2
rpm
Pump 1
rpm
Pump 2
Key-to-line
Key-to-line
bar
bar
Fig. 4‐89
M1: Mode Speed control with
pressure display
Pump 1
Pump 2
bar
bar
1
2
Key-to-line
Key-to-line
Fig. 4‐90
M1: Mode Pressure control
Fig. 4‐91
Fig. 4‐92
Operation
4‐66
P/N 213828_11
 2014 Nordson Corporation
VersaBlue_PPA
Motor
Switching On/Off Motor (Individual Enable)
Only enabled motors can be switched on. Prerequisite: The system is ready
for operation.
rpm: revolutions per minute
Key-to-lin
e
Selecting Key-to-line or Manual Mode
In manual mode the motor runs at the set speed; in key-to-line it runs at the
speed determined by the line speed signal value.
Key-to-line mode: Indication lamp lit.
Manual mode: Indication lamp not lit.
If there are more than three motors, the function Go to pump can be used.
Touch the key next to a pump field to use the function. A window showing all
of the pumps opens.
This prevents having to scroll up/down with the arrow keys when there is a
large number of pumps.