Nordson VersaBlue VA - Special Models; Software Configuration Code for Special Models

Parts
8‐2
P/N 213828_11
 2014 Nordson Corporation
VersaBlue_PPA
Special Models
VA025E4EEXX4/PA#W1DXCGXXXXXXXXXXXXXX
1
V
2
A
3
0
4
2
5
5
6
E
7
4
8
E
9
E
10
X
11
X
12
4
13
/
14
P
15
A
16
#
17
W
18
1
19
D
20
X
21
C
22
G
Code
Box
ADHESIVE MELTER
VersaBlue
Nordson Engineering GmbH
Lilienthalstr. 6
D 21337 Lüneburg - Germany
www.nordson.com
Serial No:
Year
An "E" (engineered) instead of the "-" in box 6 of the configuration code
indicates a special model. The design deviates from what can be configured
and is indicated by a hash sign "#" in the respective box. In the example
above, it would be a special feature of level monitoring.
When necessary, a supplement describing the special feature is added to the
manual.
When appropriate, a so-called Delta (n) Parts List is added to the document
Parts List. It contains the parts that deviate from the standard and are
indicated with a hash sign "#"; in the corresponding technical drawings or
wiring diagram, the n symbol is used.
Software Configuration Code for Special Models
Unlike the (hardware) configuration code indicated on the ID plate, the
software configuration code may not contain any special characters, such as
the hash sign "#".
The software configuration code for the special model can be found in the
separate document Table of Documents. It must be entered e.g. when a
software update has been installed.