Nortel CallPilot - Page 114

114 Chapter 9 Replacing media drives
CAUTION
Use only a CD-ROM drive that is approved by Nortel.
CD-ROM drive installation overview
To remove the CD-ROM drive
CAUTION
Use an ESD wrist strap to protect static-sensitive components.
Note: The CD-ROM drive is installed in the top bay.
Step Action
1
Prepare the server for CD-ROM drive replacement as follows:
a. Shut down the server, and then disconnect the power and
peripheral device cables.
b. Remove the side cover.
c. Remove the upper fan holder foam.
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.