Server features 169
Part Function
Network
controller LEDs
(green)
Left: 10/100Base-T controller LED (NIC1 10/100 MB:
ELAN
for Meridian 1/Communication Server 1000 connection)
Right: 10/100/1000Base-T controller LED (NIC2 1 GB:
CLAN
for Customer LAN connection)
Sleep mode button Not used
Power button Turns the server’s power on or off.
Status LEDs Indicate when the server is powered up and the disk
drives are active.
•
Left: hard drive activity LED (not used)
• Center: power/sleep LED (green)
•
Right: status LED (bi-color) indicates whether
the server is functioning properly, or whether a
hardware event has occurred.
USB connector For future use
Floppy disk eject
button
Ejects the floppy disk.
Floppy drive Drive for 3-1/2 inch diskettes.
IDE CD-ROM drive
(5.25 in.)
Enables you to use the CallPilot software and
documentation CD-ROMs.
CD drive eject button Opens the CD-ROM drawer. Push the button again
to close the drawer.
Backup tape drive Allows backup of hard drive data.
Hard drive 1 10,000 rpm hard drive
Hard drive 2 10,000 rpm hard drive
Drive bay Vacant
Drive bay Vacant
Drive bay Vacant
Air flow slot Must remain empty for proper system cooling.
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.
To Next Page
Loading...
