40 Chapter 4 Using Windows online diagnostic tools
Parameter Description
-d Deletes the host specified by inet_addr.
-s
Adds the host and associates the Internet address
inet_addr with the Physical address eth_addr. The
physical address is given as six hexadecimal bytes
separated by hyphens. The entry is permanent.
To run the arp command from Windows
Step Action
1
Click Start → Programs → Accessories → Command Prompt.
Result: The Command Prompt window appears.
2
At the Command prompt, type arp with the required parameters (for
example, arp -g 200.286.0.32).
3
Press Enter.
Result: The system runs the arp command.
Type Exit to exit the Command Prompt window and return to
Windows.
—End—
The nbtstat command
The nbtstat command displays protocol statistics and current TCP/IP
connections using NBT.
Nbtstat command syntax
The nbtstat command uses the following syntax:
nbtstat [-a remotename] [-A IP address] [-c] [-n]
[-R] [-r] [-S] [-s] [interval]
Nbstat parameters
Parameter Description
-a remotename
Lists the remote computer’s name table using its name.
-A IP address Lists the remote computer’s name table using its IP
address.
-c
Lists the contents of the NetBIOS name cache giving
the IP address of each name.
Nortel CallPilot
703t Server Maintenance and Diagnostics
NN44200-702 01.03 Standard
5.0 3 April 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.
To Next Page
Loading...
