8-2 Provisioning the external alarms
AccessNode 323-3001-210 Issue 1.0
Prerequisites for installation
The choice of site and compliance with local regulations (such as the
applicable electrical codes, right-of-way easements, and noise requirements)
are the responsibility of the operating company.
• The cabinet has been mounted on the selected concrete pad as defined in
Chapter 2, “Installing the cabinet”.
• All hardware and materials are available, and have been checked for
completeness and readiness for the installation.
• All the required drawings, local installation instructions, job
specifications, and other documentation are available and ready for use.
To Next Page
Loading...
