AccessNode Series 800A Outside Plant Cabinet Installation 323-3001-210 Issue 1.0
13-1
Cabinet and equipment wiring and
cabling 13-
This chapter describes the wiring and cabling information needed to assist in
the installation verification processes and troubleshooting procedures as
defined by Nortel Networks and local customer practices.
Installation information in this chapter
Diagrams, schematics and tables are included in this chapter for the S800A
cabinet and AccessNode equipment.
Table 13-1 on page 13-2 is provided for your quick reference to the contents
of this chapter. Use this table to navigate to the specific wiring and cabling
information that you need.
Note that the information contained in this chapter is standard for the S800A
cabinet and that job or site specific wiring and cabling may differ slightly
depending on the job or site requirements.
Table 13-13 on page 13-56 through Table 13-21 on page 13-79 give you the
cabinet wiring and cabling information in tabular form. Reference these tables
for detailed interconnect listings for point-to-point wiring.
To Next Page
Loading...
Need help?
General
