Installing the cabinet 2-15
AccessNode Series 800A Outside Plant Cabinet Installation 323-3001-210 Issue 1.0
Procedure 2-3 (continued)
Preparing the cabinet for installation
Securing the cabinet to the mounting pad
Observe the following cautions before securing the cabinet to the mounting
pad:
Removing eyebolt from cabinet
Observe the following caution before removing the eyebolt from the cabinet:
—continued—
CAUTION
Risk of galvanic corrosion
The anchor plate sealant kit must be installed before the
cabinet is lifted on the mounting pad. Improper installation
of the sealant kit can cause galvanic corrosion damage to the
cabinet.
CAUTION
Potential equipment damage and personal injury
No equipment should be installed until the cabinet is firmly
secured to its mounting pad.
CAUTION
Potential equipment damage and personal injury
Do not open the front or rear doors unless the cabinet is
firmly secured to the shipping pallet or the mounting pad.
CAUTION
Risk of equipment damage
Discard eyebolts removed from cabinet after lifting. Never
reuse eyebolts.
To Next Page
Loading...
