Oce VarioStream 7000 SINGLE - Page 127

5.6.3 Input at the operator panel
A29246-X20-X-4-7680 / fa505.fm 127
• Entering the paper width:
• Setting the calibration gap:
4. Click on the following button:
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
2. On the operator panel select:
• Menu <VarioStream> <Configuration> <Paper> <Dimensions>
3. Under "Paper width":
• Set the paper width with the slide control.
or
• Enter the paper width in the text field.
4. Click on the following button:
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
1 of 2
Proceed as follows:
2 of 2