5.9.2.1 Removing the developer station
152 A29246-X20-X-4-7680 / fa509.fm
Final tasks for removing the developer station
Proceed as follows:
1. Push the lever on both roller brakes
upwards.
2. Pull the replacement cart's unlocking
rod and then pull the replacement cart
backwards.
Important
Developer can become lumpy.
The developer station should not be subjected to strong heat!
For this reason, do not put the replacement cart with the developer station in the
direct vicinity of heat sources, such as heaters or hot air fans, nor in places where it
could be exposed to direct sunlight.
3. Push the replacement cart to one side and leave in a location protected from direct
heat.
1 of 2
To Next Page
Loading...
