6.3 Cleaning the paper path
A29246-X20-X-4-7680 / fa602_pinfed.fm 183
12. Swivel down the paper transporter by
the handle to the stop point and hold
firmly. At the same time, raise the
locking lever with your thumb to the
point where it jumps back to its exit
position.
Caution
Danger of pinching when swiveling up the paper transporter.
In the next step, swivel the paper transporter upwards slowly and mind your fingers.
13. Swivel the paper transporter up again.
14. Close the rocker.
15. Clean the area between the paper transporter and developer station with the vacuum
cleaner.
Proceed as follows:
To Next Page
Loading...
