7.2.4 Replacing the developer
244 A29246-X20-X-4-7680 / fa701.fm
Filling new developer
Caution
Observe the safety directives before filling the developer (see section 7.2.4
Replacing the developer, page 238).
Note
If the first worksteps for replacing the developer have already been carried out, then
continue with step 7. >>> page 245.
Proceed as follows:
1. If the printing system has not yet stopped, click the following button:
2. On the operator panel select:
• Menu <Replace consumables> <Fill developer>
3. Click on the following button to start refilling the developer:
Information on the icons displayed on the operator panel under "Worksteps":
see section Icons, page 93
4. Open the left and center door at the back of the printing system.
1 of 8
To Next Page
