Oce VarioStream 7000 SINGLE - Page 76

4.2.2.2 Menus<VarioStream>
76 A29246-X20-X-4-7680 / fa400.fm
<Standard resources> Select and display standard resources for I-
Mode
<Resource management> Install new resources or
delete existing resources
<PCL mode> The sub-menus contain the parameters for PCL
mode
<Properties> Settings for job separation, alignment, print
mode, number of copies and lines per forms
overlay
<Continuous feed> Settings for specific parameters for continuous
printing in PCL mode
<Standard resources> Select and enter standard resources for PCL
mode
<Resource management> Install new resources or
delete existing resources
<C/E mode> The sub-menus contain the parameters for C/E
mode
<Properties> Set general properties for C/E mode, specific
parameters for the EFO values, for 2-up and
print orientation
<Channel extensions> Settings for specific parameters for channel
extensions
<Channels> Displays the current channel settings and
settings for channel control
<Channel A / B / C> Select and enter parameters for channel A
<Channel A / B / C> Select and enter parameters for channel B
<Channel A / B / C> Select and enter parameters for channel C
<Special functions> The sub-menus contain special parameters for
the printing system
<Clean corotrons> Cleans all corotrons in the printing system
<Clean LED print head> Cleans the LED print head
<Operator trace> Write an error log
<Service ticket> Display all data required to notify the service
center
Menu Description
3 of 4