4.2.2.2 Menus<VarioStream>
A29246-X20-X-4-7680 / fa400.fm 77
<Remote diagnostics> Activate or deactivate remote access by the
service
<Setup> Display and edit the globally valid print job
setups
<Setup channel A / B / C> Display and edit setups for channel A
<Setup channel A / B / C> Display and edit setups for channel B
<Setup channel A / B / C> Display and edit setups for channel C
<Replace consumables> The sub-menus contain the procedures for
replacing consumables and expendables
<Replace active filter> Procedure for replacing the active filter
<Replace pressure roller> Procedure for replacing the pressure roller.
<Replace corotrons> Procedure for replacing the transfer, charge and
discharge corotrons
<Replace developer> Procedure for draining or filling the developer in
the developer station
<Fill developer> Procedure for filling the developer in the
developer station
<Replace heater> Procedure for replacing the heater
<Replace fine filter> Procedure for replacing the fine filter
<Replace fuser oil bottle> Procedure for replacing the fuser oil bottle.
<Replace fuser roller> Procedure for replacing the fuser roller
<Replace photoconductor drum> Procedure for replacing the photoconductor
drum
<Run in photoconductor drum> Procedure for inserting the photoconductor
drum
<Replace cleaning brush> Procedure for replacing the cleaning brush
<Replace cleaning belt> Procedure for replacing the cleaning belt
<Replace toner bottle> Procedure for replacing the toner bottle
<Fill toner box> Procedure for filling the toner box
<Replace waste toner bottle> Procedure for replacing the waste toner bottle
<Toner bottle identification> Displays information on the toner used
<Replace transfer roller> Procedure for replacing the transfer roller
<Replace transfer foil> Procedure for replacing the transfer foil
Menu Description
4 of 4
To Next Page
Loading...
