45530603TH Rev.2
5-2
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.1 System maintenance menu (for maintenance personnel)
This menu is activated when the power is turned with the BACK, OK and ON LINE buttons held down in the standby mode of the device, and then the window to enter the password is
displayed.
The menu is displayed in English regardless of the destination of the product.
Note! This menu is not disclosed to the end users.
Ta bl e 5 -1 Ma in te na nc e m enu di s pl ay t abl e
Category Item Value Default Function Valid
*System Maintenance is displayed in English only.
System
Maintenance
Enter Password ************ 000000 Enters a password to enter the system maintenance menu.
The default is “000000”.
The number of digits for the password is 6 to 12 digits of figures and small-case alphabets.
System
Maintenance
Save Syslog Execute - Stores a network communication log (syslog) in a Non-volatile memory. ET
Print Syslog Execute - Prints a network communication log (syslog). ET
Condition Log size 20
50
100
500
* Sets the number of errors when an error log is returned as a CSV format in HTTP.
Returns error logs from the latest error of the number to the number set in this menu.
The default is 20.
The maximum is still 500 even when HDD is installed.
ET
New Parts Keep
Mode
Execute - Places the printer online, a command being issued from the CU to PU, when the [OK] button is pressed.
With the printer on, a consumable of the printer can be replaced with a new one, and then the printer
can be checked for proper operation (where, not breaking the new one’s fuse, the printer does not count
consumption as the life of the consumable replaced with the one).
Turning off the printer ends the check mode, and then turning it on disables the mode.
ET
Engine Status Execute - Prints engine information. ET
Engine Diag Mode - Enters the self diagnosis mode of the engine. ET
Change Password >> NEXT >> Displays the menu to change a password.
Change
Password
New Password ************ - Sets a new password to enter the System Maintenance menu.
Six to twelve alphanumeric characters can be entered as the password.
ET
Verify Password ************ - Prompts a user to verify and enter again the new password that is set by user in 'New Password' for to
enter the 'System Maintenance menu'.
Six to twelve alphanumeric characters can be entered as the password.
ET
ET: Reflected at the time of menu setting.
To Next Page
Loading...
Need help?
General
