45530603TH Rev.2
2-18
Oki Data CONFIDENTIAL
2. DESCRIPTION OF OPERATIO N
2.4 Cover Opening and Closing Detection Switch
The front cover opening/closing detection switch, the exit left cover opening/closing detection
switch, and the toner cover opening/closing detection switch of this apparatus are effective
when the AC cable is plugged into the socket and the Main power switch is turned ON,
regardless of the Power switch-on or off.
Front cover opening/closing detection
The status of all Image Drums are up is detected by opening the front cover.
In the case of opening and closing for the front cover during the operation, standby, or
power save mode, the apparatus performs color registration correction.
In the case of opening and closing for the front cover during the sleep mode or power
switch-off, the apparatus performs color registration correction when recovering from
the sleep mode or the power switch is turned ON.
The following is displayed by opening the front cover during the sleep mode.
“Front cover is opened.
Refer to the Help.”
Exit unit opening/closing detection
The removal of the fuser unit is detected by opening the exit unit.
When opening and closing the exit unit during the operation, standby, or power save
mode, the apparatus performs release check of the fuser unit.
When opening and closing the exit unit during the sleep mode, or power switch-off,
the apparatus performs the release check of the fuser unit when recovering from the
sleep mode or the power switch is turned ON.
The following is displayed by opening the exit left cover during the sleep mode.
“Exit unit is removed
Refer to the Help.”
Ton er ch an ge c ove r o pe nin g /c lo si ng d et ec t io n
The status of the toner change cover is open is detected.
When opening and closing the toner change cover during the sleep mode, or power
switch-off, the apparatus performs the check of the toner cartridge replacement when
recovering from the sleep mode or the power switch is turned ON.
The following is displayed by opening the toner change cover during the sleep mode.
“Toner change cover is opened.
Refer to the Help.”
To Next Page
Loading...
Need help?
General
