Oki C911 - Lever-Stacker-Full

45530603TH Rev.2
6-15
Oki Data CONFIDENTIAL
6. REPLACEMENT OF PARTS
6.2.11 Lever-Stacker-Full
(1) Remove the Cover-Assy-OP-Panel.(Refer to section 6.2.10)
(2) Remove the screw
①
and remove the HDD cover
②
.
(2) Remove the eight screws (silver) (6mm)
③
to detach the Cover-Rear
④
.
(3) Remove two claws and the Cover-Top-A
⑤
.
(4) Remove the Lever-Stacker-Full
⑥
.
6.2.12 Eject-Assy-Joboff/Motor-Joboff
(1) Remove the Lever-Stacker-Full. (Refer to section 6.2.11)
(2) Remove the photo sensor and disconnect the cable.
(3) Remove the two screws (silver)(8mm)
①
and screw (silver)(6mm)
②
and remove
the Eject-Assy-Joboff
③
.
(4) Remove the two screws (silver)(6mm)
④
, two cables and remove the Motor-Assy-
Joboff
⑤
.
(5) Remove the two screws (silver)(6mm)
⑥
and remove the Motor-Joboff
⑦
.
⑤
③×8
④
①
②
Claw
Claw
⑥
③
②
⑤
①×2
④×2
⑥×2
⑦