45530603TH Rev.2
5-5
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.3 User maintenance menu functions
5.3.1 Maintenance menu (for end-users)
Some general menu categories are equivalent to the maintenance menus (but are different
form system maintenance menus).
The items available in this menus are as follows:
Default setting in shade area
Item Settings Functions
System
Adjust
Power Save Time 1 minute
2 minutes
3 minutes
4 minutes
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Sets the time to move to the power save
mode.
Sleep Time
1 minute
2 minutes
3 minutes
4 minutes
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Sets the time to move to the sleep
mode from the power save mode.
Auto Power Off Time
1 hour
2 hours
3 hours
4 hours
8 hours
12 hours
18 hours
24 hours
Sets the time to move the off mode from
the start of the standby mode.
Clearable Warning
ONLINE
Job
Sets the timing for clearable warnings
to disappear.
Auto Continue
On
Off
Sets whether to recover the printer
automatically upon a memory overflow
or tray request.
Item Settings Functions
System
Adjust
Manual Timeout Off
30 seconds
60 seconds
Sets the time to wait for feeding paper
for printing a job at manual feeding.
The job is cancelled when the paper is
not loaded within the time.
Wait Timeout
Off
5 seconds
10 seconds
20 seconds
30 seconds
40 seconds
50 seconds
60 seconds
90 seconds
120 seconds
150 seconds
180 seconds
210 seconds
240 seconds
270 seconds
300 seconds
Sets the time period between stopping
job data reception and forced printing of
a job. When a PostScript job, the job is
not printed, being cancelled.
Low Toner
Continue
Stop
Sets the manner of printer when a
state that the printer is low on toner is
detected.
'Continue' allows the printer to continue
of printing with remaining online.
'Stop' makes the printer to offline.
Jam Recovery
On
Off
Sets whether to perform recovery
printing when a paper jam occurs. Off
cancels a job including the page being
printed when the jam occurs.
Error Report
On
Off
Prints an error report when an internal
error occurs. This option is available
only for PostScript, PCL XL and XPS.
Hex Dump Execute Prints out data received in hexadecimal
format.
To Next Page
Loading...
Need help?
General
