45530603TH Rev.2
7-13
Oki Data CONFIDENTIAL
7. PERIODIC MAINTENANCE
7.5 Cleaning Belt Unit
When a dirty by grease etc, clean the Belt Unit.
(1) Remove the Belt unit refer to the section 7.2.
Note! • Carefully remove the belt unit so that waste toner does not spill.
• Never place the removed belt units upright.
(2) Impregnate a BEMCOT with primary or highest quality ethanol.
Wipe the Belt unit not caused damage.
Wipe evenly by new BEMCOT.
(3) Attach the Belt unit refer to the section 7.2.
To Next Page
Loading...
Need help?
General
