Oki C911 - Board-Ahr(High-Voltage Relay PCB)

45530603TH Rev.2
6-21
Oki Data CONFIDENTIAL
6. REPLACEMENT OF PARTS
6.2.23 Board-AHR(High-voltage relay PCB)
(1) Remove the Motor-Assy-ID.(Refer to section 6.2.22)
(2) Remove the ten screws(silver)(6mm)
①
and remove the Board-AHR
②
.
6.2.24 Board-TAGRW/FFC-Cable/Motor-FAN
(1) Remove the Plate-Box-MainPCB.(Refer to section 6.2.21)
(2) Remove the Guide-Cable-FFC.(Refer to section 6.2.22)
(3) Remove the screw(silver)(6mm)
①
and remove the TAGRW-Assy
②
,
③
.
(4) Remove the two screws(silver)(6mm)
④
and remove the Board-RFID
③
from the
Plate-Shield-TAGRW
②
.
(5) Remove the Motor-FAN-Assy
⑤
and remove the Motor-FAN
⑥
.
(6) Remove the four screws(silver)(6mm)
⑦
and remove the Plate-Assy-Pillar-B
⑧
.
(7) Remove the Motor-FAN
⑨
.
①×1 0
②×5
⑤
⑥
①
②
③
⑧
⑨
④×2
⑦×4