Oki C911 - Board-F1 W(Soft Switch PCB)

45530603TH Rev.2
6-34
Oki Data CONFIDENTIAL
6. REPLACEMENT OF PARTS
6.2.47 Sensor-Assy-Front/Motor-FAN
(1) Open the Cover-Front.
(2) Remove the four claws and remove the Cover-In-A
①
.
(3) Remove the screw(silver)(6mm)
②
and remove the Sensor-Assy-Front
③
.
(4) Remove the two Round-head screws(black)(6mm)
④
and remove the Cover-In-D
⑤
.
(5) Remove the two screws(silver)(30mm)
⑥
and remove the Motor-FAN
⑦
.
6.2.46 Board-F1W(Soft switch PCB)
(1) Remove the Cassette-Assy and Cover-Assy-Front.(Refer to section 6.2.8,6.2.18)
(2) Remove the five Round-head screws(black)(6mm)
①
and remove the Cover-
Middle
②
.
(3) Remove the two screws(silver)(6mm)
③
and remove the Soft-SW-Assy
④
.
②
③×2
④
①×5
①
⑤
⑦
②
③
Claw
Claw
Claw
④×2
⑥×2