Oki C911 - Consumable Counter Display

45530603TH Rev.2
5-49
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.3.2.10 Consumable counter display
The consumable counter display is used for viewing the usage of consumables.
1. Enter the self-diagnostic mode and, until CONSUMABLE STATUS appears,
press the MENU
or MENU button (the MENU button displays the next test
option and the MENU
button displays the preceding test option). Then press
the OK button.
2. Pressing the MENU
or MENU button displays the usage of each consumable
(Pressing the ON LINE or CANCEL button is disabled).
3. Press the BACK button to end the test. (The state is restored to the step 1).
Upper line of the
display
Lower line of the
display
Format Unit Details
S1-ID UNIT ********
IMAGES
DEC Images Each displays the number of turns performed
by each image drum unit from the first-time
installation of it until present, (*1)
S2-ID UNIT ********
IMAGES
DEC Images
S3-ID UNIT ********
IMAGES
DEC Images
S4-ID UNIT ********
IMAGES
DEC Images
S5-ID UNIT ********
IMAGES
DEC Images
S1-ID USED ******** % DEC % Displays the usage of ID of each color.
S2-ID USED ******** % DEC %
S3-ID USED ******** % DEC %
S4-ID USED ******** % DEC %
S5-ID USED ******** % DEC %
FUSER UNIT ********
PRINTS
DEC Prints Displays the number of prints made from
the first-time installation of a fuser unit until
present *2
FUSER
USED
******** % DEC % Displays the usage of the fuser unit.
TR BELT
UNIT
********
IMAGES
DEC Images Displays the number of prints made to date
from the first-time installation of a belt unit
until present *3
TR BELT
USED
******** % DEC % Displays the usage of the belt unit.
Upper line of the
display
Lower line of the
display
Format Unit Details
S1-TONER
(FULL)
******** % DEC % Displays the usage of toners of each color.
S2-TONER
(FULL)
******** % DEC %
S3-TONER
(FULL)
******** % DEC %
S4-TONER
(FULL)
******** % DEC %
S5-TONER
(FULL)
******** % DEC %
S1 OVER
RIDE CNT
********
TIMES
DEC Times Displays the extension life counter value of
toner cartridges of each color
S2 OVER
RIDE CNT
********
TIMES
DEC Times
S3 OVER
RIDE CNT
********
TIMES
DEC Times
S4 OVER
RIDE CNT
********
TIMES
DEC Times
S5 OVER
RIDE CNT
********
TIMES
DEC Times
*1 One third of the number of drum turns in A4 (A4 portrait) three-pages-per-job printing is
regarded as one count.
*2 A4 vertically long (297mm) is regarded as one count. A3 nobi is regarded as two counts
as with the conventional models, and the middle length between A4 vertically long to A3
nobi are calculated in proportion. For any sheet exceeds A3 nobi length, a setting so as
not to separate from the conventional count for the long paper (up to 1200mm) should be
made and then, a calculation should be performed in proportion.
*3 One third of the number of belt turns in A4 (A4 portrait) three-pages-per-job printing is
regarded as one count.