45530603TH Rev.2
5-50
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
5.3.2.11 Print counter display
The print counter display is used for viewing print counter values.
1. Enter the self-diagnostic mode and, until PRINTER STATUS appears, press
the MENU
or MENU button. Then press the OK button. (The MENU button
displays the next test option and the MENU
button displays the preceding test
option)
2. Pressing the MENU
or MENU button displays the number of printed number
in order.
(Pressing the ON LINE or CANCEL button is invalid.)
3. Press the BACK button to end the test. (The state is restored to the step 1).
Display of consumable continuous counter
Upper line of
the display
Lower line of
the display
Format Unit Details
S1-
IMPRESSIONS
********
PRINTS
DEC Prints Displays the number of printed sheets of
each color (*1)
S2-
IMPRESSIONS
********
PRINTS
DEC Prints
S3-
IMPRESSIONS
********
PRINTS
DEC Prints
S4-
IMPRESSIONS
********
PRINTS
DEC Prints
S5-
IMPRESSIONS
********
PRINTS
DEC Prints
TOTAL
SHEET CNT
********
PRINTS
DEC Prints Displays the total number of printed sheets
(*1)
*1 Tw o co un t s ap pl y to t he d up lex p ri nt ing .
5.3.2.12 Factory-Shipping mode switching
The Factory-Shipping mode switching is used for switching from the Factory to Shipping
mode.
1. Enter the self-diagnostic mode and, until the following message appears, press
the MENU
or MENU button.
FactoRY MoDe set
2. Press the OK button. The following message appears. Press the MENU
or MENU
button until the option intended (refer to the table shown below)
appears
FactoRY MoDe
sHiPPing MoDe *
3. A setting for the option can be selected by pressing the OK button while the
intended option is displayed.
4. Press the OK button while the intended setting value is on the display. Then, the
setting value is stored in the EEPROM.
5. Press the BACK button to end the test. (The state is restored to the step 1)
FACTORY MODE Setting Items
Upper line of
the display
Lower line of
the display
Function
FACTORY
MODE
FACTORY
MODE
Sets the Factory mode.
SHIPPING
MODE
Cancels the Factory mode to enable the shipping mode function.