Oki C911 - Duplex-Board(Board-FIT-1)(Duplex Unit Control PCB)

45530603TH Rev.2
6-18
Oki Data CONFIDENTIAL
6. REPLACEMENT OF PARTS
6.2.17 Duplex-Board(Board-FIT-1)
(Duplex unit control PCB)
(1) Remove the Duplex-Unit. (Refer to section 6.2.16)
(2) Remove the screw(black)(8mm)
①
and three screws(silver)(6mm)
②
and remove
the Cover-Dup-Top
③
from the Duplex-Unit.
(3) Remove the screw(black)(8mm)
④
and remove the Board-FIT-1
⑤
.
(4) Remove the two Screw-Shoulder(silver)(15.4mm)
⑥
and connector
⑦
and spring
⑧
.
6.2.18 Cover-Assy-Front
(1) Open the Cover-Assy-Front
①
.
(2) Remove the screw(silver)(6mm)
②
and remove the Cover-In-B
③
.
(3) Disconnect the three connectors.
(4) Remove the six screws(black)(8mm)
④
and remove the Cover-Assy-Front
①
.
①
②
③
④×6
① ②
②
②
⑥×2
⑧×2
③
⑦
④
⑤