45530603TH Rev.2
7-15
Oki Data CONFIDENTIAL
7. PERIODIC MAINTENANCE
7.7 Cleaning Transfer roller unit and paper feeding route
When a dirty the top or bottom of output paper, clean the Transfer unit and paper feeding
route. To clean regularly, prevent the dirt.
Note! • Be careful not to touch or damage the transfer roller.
• Don't use water, neutral detergent, or methanol, because damage to
transfer roller.
(1) Press and hold the power switch for approximately 1 sec. to turn off the power
supply.
(2) Tu r n o ff t he m a in p ow e r s up pl y.
(3) Lift the opener of the output unit and pull out the output unit.
(4) Pull up the fuser unit’s jam release levers (blue).
To Next Page
Loading...
Need help?
General
