Oki C911 - Page 152

45530603TH Rev.2
5-11
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
Item Settings Functions
Print
Adjust
Transfer Roller Cleaning Execute In order to prevent the occurrence of
dirt on the backside due to the dirty
second transfer roller, cleans the
second transfer roller.
High Humid Mode
Mode 1
Mode 2
Off
Sets ON/ OFF of the curl reduction
mode.
Moisture Control
On
Off
Specifies ENABLE/ DISABLE of the
dew condensation control.
When ENABLE is specified, it may take
time to print the first page.
Narrow Paper Speed
Normal
Slow
Sets the print speed for narrow paper.
Normal: the print speed is not changed
when printing on narrow paper.
Slow: The print speed is changed when
printing on narrow paper.
Print Mode
Normal
Slow
Sets ENABLE/ DISABLE of printing
with making a wider image space in
continuous printing.
Normal: Prints with a certain image
space (paper space) in continuous
printing.
Slow: Enables the control to print
making a wider image space (paper
space) in continuous printing
Transfer
Setting
Cyan
Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower a setting when a stand out white
dot at cyan, green and blue printing.
Raise a setting when a stand out dark
dot or line at cyan printing.
Megenta
Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower a setting when a stand out white
dot at magenta and red printing.
Raise a setting when a stand out dark
dot or line at magenta printing.
Item Settings Functions
Print
Adjust
Transfer
Setting
Yellow
Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower a setting when a stand out white
dot at yellow printing.
Raise a setting when a stand out dark
dot or line at yellow printing.
Black
Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower a setting when a stand out white
dot at black printing.
Raise a setting when a stand out dark
dot or line at black printing.
White
Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower a setting when a stand out white
dot at white printing.
[Conditions for display]
When five color model and “Admin
Setup”-“Color Setup”-“Spot Color” is
“White”.
Clear
Transfer
Setting
0
+1
+2
+3
-3
-2
-1
Lower a setting when a stand out white
dot at clear printing.
[Conditions for display]
When five color model and “Admin
Setup”-“Color Setup”-“Spot Color” is
“Clear”.
Admin
Setup
Enter Password ************ Enters a password to start the
administrator menu.
The default is “aaaaaa”.
The number of digits for the password is 6 to
12 digits of figures and small-case alphabets.
Network Setup
Print Setup
PS Setup
PCL Setup
XPS Setup
IBM PPR Setup
EPSON FX Setup
Color Setup