Oki C911 - Page 155

45530603TH Rev.2
5-14
Oki Data CONFIDENTIAL
5. MAINTENANCE MENUS
Item Settings Functions
Admin
Setup
Others
Setup
HDD
Setup
Format
Partition
PCL
Common
PS
Formats a specified partition.
[Conditions for display]
- When HDD is installed
- “Boot Menu"-"HDD Setup"-"Enable
HDD" is “Yes”
- "Admin Setup"-"Others Setup"-
"Storage Common Setup"-"Enable
Initialization" is "Yes”.
Erase
HDD
Execute This item is displayed only when HDD
is installed.
[Conditions for display]
- When HDD is installed
- “Boot Menu"-"HDD Setup"-"Enable
HDD" is “Yes”
- "Admin Setup"-"Others Setup"-
"Storage Common Setup"-"Enable
Initialization" is "Yes”.
Storage
Common
Setup
Check
File
System
Execute Resolves the discrepancy between the
actual (free) space of the file system
and displayed free space and recovers
the management data (FAT) information.
[Conditions for display]
- When HDD is installed
- “Boot Menu”-”HDD Setup”-”Enable
HDD” is “Yes”
Check
All
Sectors
Execute Recovers the sector inofmration failure
of HDD and the above file system
discrepancy.
[Conditions for display]
- When HDD is installed
- “Boot Menu”-”HDD Setup”-”Enable
HDD” is “Yes”
Enable
initialization
No
Yes
Prevent the setting change in
accordance with the initialization of
BlockDevice (HDD, FLASH).
Security
Setup
Job
Limitation
Off
Encrypted Job
Job limitation mode control
[Conditions for display]
- HDD is installed and “Boot Menu”-
”HDD Setup”-”Enable HDD” is “Yes”.
Item Settings Functions
Admin
Setup
Others
Setup
Security
Setup
Make
Secure
HDD
Execute Enables the encryption function of data
stored in HDD.
Generates a cipher key and sets the
encryption function (security mode)
information to ON. In addition, initializes HDD.
[Conditions for display]
- HDD is installed, the encryption
function is disabled and [Storage
Common Setup]-[Enable Initialization]
is Yes, and “Boot Menu”-”HDD Setup”-
”Enable HDD” is “Yes”.
Make
Normal
HDD
Execute Disables the encryption function of data
stored in HDD.
Deletes the cipher key and sets the
encryption function (security mode)
information to OFF. In addition,
initializes HDD.
[Conditions for display]
- HDD is installed, the encryption
function is enabled and [Storage
Common Setup]-[Enable Initialization]
is Yes, and “Boot Menu”-”HDD Setup”-
”Enable HDD” is “Yes”.
Reset
Cipher
Key
Execute Reproduces a cipher key used for the
encrypted HDD.
By doting this processed, data stored in
HDD cannot be recovered.
[Conditions for display]
HDD is installed, the encryption function
is enabled and [Storage Common Setup]-
[Enable Initialization] is Yes, and "Boot
Menu"-"HDD Setup"-"Enable HDD" is “Yes”.
Language
setup
Language
Initialize
Execute Initializes the message file installed in
FLASH.
Pressing the “OK” button shows the
following confirmation message.
Are You Sure?
Yes
No
If No is selected, the screen is returned
to the previous menu. If Yes is selected,
the device exits the menu and starts
delete processing after reboot.