45530603TH Rev.2
4-25
Oki Data CONFIDENTIAL
4. TROUBLESHOOTING PROCEDURE
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Power Save
Varies Varies Lights out at the same time when the printer
enters the sleep/off mode and lights up when
exits the sleep/off mode.
Basically, it lights out at the same time when the
printer enters the power save mode and lights up
when the printer exits the power save mode.
However, there are some exceptions as follows:
It lights up even in power saving when the printer is
operated or any cover of the printer is opened (*2).
It lights up in response to a button operation or
opening of a cover of the printer, stays on until
the expiration of a timeout (*3), and then stays lit
dimly.
Even when the status changes to power save
immediately after a button operation, it stays on
until the expiration of the lights-out timeout from
the last button operation or release of the button.
It stays on from LCD initialization at power-on to
switching to online.
*1 Off: When the operation panel itself is not
energized
On: Illuminating at the brightness set for
Panel Brightness During Operating
Dim: Illuminating at the brightness set for
Panel Brightness While Power Save
*2 The following is the cases falling on
exceptions: while a cover is left opened,
another cover is opened and closed, or the
printer enters the power save mode.
*3 It is the time set in [Panel Setup] - [Panel
Backlight Timer] of Admin Setup.
Invalid Operation Varies Varies This message pops up with a press or successive
presses of the power save button when the printer
is unable to enter the power save mode, and in
three seconds, it returns to the previous display.
Sleep Mode
Varies Varies Indicates that the printer has entered the sleep
mode. Actually, the printer enters the sleep
mode immediately after this message appears;
therefore, it is hard to read this message.
Color Adjusting
Varies Varies Indicates that automatic color adjustment is
being executed.
LCD Status Message
( represents a blank line.)
Online
indicator
Inspection
lamp
Details
Density Adjusting
Varies Varies Indicates that automatic density correction is
being executed.
The status code 10988 corresponds to the
density read-out, and 10994 corresponds to the
density correction.
Density Adjust has
not completed. Please
execute "Adjust
Density" for printing
correctly
Varies Varies Indicates that the density adjustment to the
new density setting has not completed because
density adjustment was not executed after the
density setting change or density adjustment
was cancelled midway.
Transfer Roller
Cleaning
Varies Varies Indicates that transfer roller cleaning is in progress.
This status is displayed only when transfer roller
cleaning is executed manually; not displayed
when it starts automatically during initialization.
Media Weight
Detecting
Varies Varies Indicates media weight is being detected.
Flash Download Varies Varies Indicates that the PU firmware program data is
being downloaded.
Since downloading of the PU firmware is not
disclosed to users, the status does not occur in a
user environment.
Please wait
Executing
Maintenance
Varies Blink Maintenance is being carried out. Panel operation
is not available in this status. (This message
is displayed during MPS function-related
maintenance, but objects are not limited to MPS.)
%C%: %INFO%
Varies Varies Indicates detection of a new consumable (toner).
This status message appears at detecting
a new consumable (toner), and disappears
automatically in 3 seconds.
%INFO% indicates a message retrieved from a
consumable tag.
%C% indicates the initial letter of a toner color
name.
Wait a Moment
Network Initializing
Varies Varies Indicates that the network is in initialization.
Wait a Moment
Message Data
Processing
Varies Varies Indicates that message data to be updated is
being processed.
To Next Page
Loading...
