OMICRON 5
About this manual
About this manual
This CT SB2 User Manual provides information on how to use the CT SB2 switch box. The CT SB2 User
Manual contains important safety instructions for working with CT SB2, gets you familiar with operating
it, and provides typical application examples. Read and observe the safety instructions described in
chapter 1 "Safety instructions" on page 7 and all relevant operation and installation instructions.
Following the instructions in this User Manual will help you to prevent danger, repair costs, and avoid
possible down time due to incorrect operation.
The CT SB2 User Manual and the CT Analyzer User Manual always have to be available at the site
where the CT SB2 switch box is used.
Reading the CT SB2 User Manual alone does not release you from the duty to comply with all relevant
national and international safety regulations.
Safety symbols
In this manual, the following symbols indicate safety instructions for avoiding hazards.
DANGER
Death or severe injury will occur if the appropriate safety instructions are not observed.
WARNING
Death or severe injury can occur if the appropriate safety instructions are not observed.
CAUTION
Minor or moderate injury may occur if the appropriate safety instructions are not
observed.
NOTICE
Equipment damage or loss of data possible
To Next Page
Loading...
Need help?
General
